Heckler 5
| Model Version | 5 |
|---|---|
| Production Start | 2002 |
| Production End | 2007 |
| Suspension/Pivot System | Single Pivot |
| Material | Aluminum - 6000 series |
| Rear Wheel Travel | 130 or 143mm* (*See rear shock info) |
| Size Range | S,M,L,XL |
Rahmen-Spezifikationen
| Compatible Forks | 100mm to 160mm total travel - 160mm travel max |
|---|---|
| Headtube/Headset | 1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30 |
| Seat Post | 30.9mm - Minimum insertion 100mm |
| Front Derailleur | 34.9mm Top Pull/Top Swing (Low Clamp) |
| BB Shell Width | 68mm - Threaded - ISO |
| Chainline Spec | 50mm |
| Recommended Max Tire Size | 2.5 - may vary by tire and rim model |
| Brakes | Disc Brake - ISO |
| Max Brake Rotor Size | 160mm |
| Rear Hub | 135mm x 10mm (QR style) |
| Seatpost Clamp | 34.9mm |
Dämpfer-Maße
| Rear Shock Eye-to-Eye | 7.875" |
|---|---|
| Stroke | 2.0” or 2.25” - Both are compatible 2.0” = 125mm RWT - 2.25” = 143mm RWT |
| Mounting Bushing Width Front | 22mm |
| Mounting Bushing Width Rear | 22mm |
| Mounting Bolt Diameter Front | 8mm |
| Mounting Bolt Diameter Rear | 8mm |
| Leverage Ratio | 2.5:1 |
| Rear Shock Setup | Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 13-18mm at the shock shaft - This equates to approximately 15-25% of the total rear wheel travel. Less sag = a firmer suspension feel. |
| Rear Shock Notes | All versions of the Heckler.5 can run 7.875" x 2.0” shock or 7.875" x 2.25” - Both are compatible (2.0” = 125mm rear wheel travel - 2.25” = 143mm rear wheel travel ) |
Geometrie
Drehmomente
| Fastener | Description | Prep | Torque | Download |
|---|---|---|---|---|
| Main Pivot Axle Bolts | M8 X 1.25 X 12 low head allen cap screws | Loctite 242 | 120 inch lbs | - |
| Main Pivot Bearing Clamp | M6 X 1.0 X 16 low head allen cap screws | Loctite 242 | 60 inch lbs | - |
| Rear Shock Bolt | M8 X 1.25 X 40 allen cap screw with nylok nut | Nyloc nut | 120 inch lbs | - |
| Front Shock Axle Bolts | M5 X 0.8 X 8 allen head cap screws | Loctitie 242 | 40 inch lbs | - |
| Dropout To Swingarm | Dropout Chainring Bolts | Loctite 242 | 80 inch lbs | - |