Super 8 2
| Model Version | 2 |
|---|---|
| Production Start | 2000 |
| Production End | 2002 |
| Suspension/Pivot System | Single Pivot |
| Rear Wheel Travel | 215mm |
| Size Range | S,M,L |
Rahmen-Spezifikationen
| Compatible Forks | 150-180mm single and dual crown forks 180mm travel max |
|---|---|
| Headtube/Headset | 1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30 |
| Seat Post | 31.6mm - Minimum Insertion 100mm |
| Front Derailleur | N/A - Single Front Chainring Only |
| BB Shell Width | 68mm - Threaded - ISO |
| Chainline Spec | 55mm |
| Recommended Max Tire Size | 2.5 - may vary by tire and rim model |
| Brakes | Disc Brake only - Rear disc mount uses Rock Shox Boxxer style disc adapter |
| Max Brake Rotor Size | 203mm |
| Rear Hub | 160 x 14mm (Through Axle) - Custom Hadley Racing Hub - Zero Dish |
| Seatpost Clamp | 34.9mm |
| Component Notes | Component Notes: The Super8.2 compatible with both 24” or 26” Dia. rear wheels - Adjust dropouts accordingly. The Hadley/Super 8 rear hub dimensions are: Spoke holes - 32 Hub width - 35mm from center of hub to flange on both sides (Dishless wheel) Flange width - 60mm from eye to eye. Axle diameter - 14mm 68mm shell width - Use 73mm BB for chain tensioner mounting, BB Spindle length is 127-128mm for 55mm chainline. |
Dämpfer-Maße
| Rear Shock Eye-to-Eye | 7.875" |
|---|---|
| Stroke | 2.25" |
| Mounting Bushing Width Front | 22mm |
| Mounting Bushing Width Rear | 41mm |
| Mounting Bolt Diameter Front | 8mm |
| Mounting Bolt Diameter Rear | 8mm |
| Leverage Ratio | 3.5 : 1 |
| Rear Shock Setup | Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.-Recommended sag is 12-15mm at the shock shaft - This equates to approximately 25% of the total rear wheel travel. Less sag = a firmer suspension feel.-For Coil rear shocks here is a rough spring size to weight guideline for average coil shocks. This can vary based on rear shock model and manufacturer.100-130lbs - 600#140-160lbs - 700#160-170lbs - 750#180-200lbs - 800#210-230lbs - 850# |
Geometrie
Drehmomente
| Fastener | Description | Prep | Torque | Download |
|---|---|---|---|---|
| Shock Shuttle Bolts | To rear shock mount | Loctite 242 | 100 Inch lbs | - |
| Front Shock Eyelet | Shock to frame | Loctite 242 | 132 Inch lbs | - |
| Main Pivot Bolt | Swingarm to frame | Loctitie 242 | 42 Inch lbs | - |
| Main Pivot Bearing Clamp | Swingarm bearing | Loctitie 242 | 42 Inch lbs | - |
| Rear Dropout Bolts | Rear dropout to swingarm | Loctite 242 | 42 Inch lbs | - |