V10 1
Model Version | 1 |
---|---|
Production Start | 2002 |
Production End | 2004 |
Suspension/Pivot System | VPP - Virtual Pivot Point |
Material | Aluminum - 6000 series |
Rear Wheel Travel | 255mm |
Size Range | S,M,L |
Rahmen-Spezifikationen
Compatible Forks | 150mm to 200mm total travel - 200mm travel max |
---|---|
Headtube/Headset | 1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30 |
Seat Post | 30.9mm - Minimum insertion 100mm |
Front Derailleur | N/A - Single Front Chainring Only |
BB Shell Width | 73mm - Threaded - ISO |
Chainline Spec | 55mm |
Recommended Max Tire Size | 2.7 - may vary by tire and rim model |
Brakes | Disc Brake - ISO |
Max Brake Rotor Size | 203mm |
Rear Hub | Custom Hadley 140 x 15mm - uses 20mm floating brake mount for 160mm total hub spacing |
Seatpost Clamp | 34.9mm |
Component Notes | The V10.1 uses a custom rear hub made by Hadley Racing. The hub width is 140mm, and the Axle size is 15mm. The total rear dropout spacing is 160mm (140mm Hub + 20mm Floating Brake Mount = 160mm)- IMPORTANT - When calculating spoke lengths for the140mm hubs with 15mm thru axle, SUBTRACT 10mm from the center to flange measurement on the non-drive side of the hub and ADD 10mm to the drive side. (Offset rim to hub centerline)V10.1 Hadley Hub specs: Flange diameter 60mm on both sides. Center to left flange is 25mm Center to right flange is 45m 32 Spoke holesHadley Racing - +1 (909) 946-6780 |