Hightower 4 MY26
Rahmen-Spezifikationen
| Federungssystem | VPP |
|---|---|
| Umwerfer vorne | No compatibility |
| Steuersatz | Integrated (IS41/52) |
| Sattelstützen-Durchmesser | 31.6mm |
| Sattelklemmung | 36.4mm |
| Dämpferlänge | 230mm |
| Dämpferhub | 57.5mm |
| Translation missing: de.products.product.specs.recommended_sag | 30% (17.25mm) |
| Innenlager-Schale | 73mm Threaded |
| Maximale Reifenfreiheit | 2.5" |
| Maximale Kettenblattgröße | 36t |
| Flaschenhalteraufnahmen | 1 |
| Dämpfer-Einbaumaß vorne | 40x10 (standard bushing) |
| Dämpfer-Einbaumaß hinten | 30x8 (roller bearing) |
| Translation missing: de.products.product.specs.max_brake_rotor | 223mm |
| Hintere Bremsaufnahme | 180 PM |
| Gabel-Offset | 44mm |
Ausstattungsvarianten
Wähle eine Ausstattungsvariante
| Frame | Carbon C 29" 150mm Travel VPP™ |
|---|---|
| Dämpfer | FOX Float Rhythm, 230x57.5 |
| Gabel | RockShox Lyrik Base, 160mm |
| Schaltwerk | SRAM 70 Eagle T-Type, 12spd |
| Schalthebel | SRAM 90 Eagle T-Type, 12spd |
| Kassette | SRAM XS 1270 Eagle T-Type, 10-52t |
| Kette | SRAM 70 Eagle T-Type, Flattop, 12spd |
| Kettenführung | N/A |
| Tretlager | SRAM DUB 73mm MTB Wide BB |
| Steuersatz | Cane Creek 10 IS Integrated Headset |
| Hinterreifen | Maxxis Minion DHR II 29"x2.4", 3C MaxxTerra, EXO+ |
| Vorderreifen | Maxxis Minion DHF 29"x2.5", 3C MaxxGrip, EXO |
| Nabe vorne | SRAM MTH 716, 15x110, 6-Bolt, 32h |
| Felge vorne | Reserve 30|TR AL |
| Nabe hinten | SRAM MTH 746, 12x148, HG, 6-Bolt, 32h |
| Felge hinten | Reserve 30|TR AL |
| Front Rotor | SRAM Centerline, 200mm |
| Rear Rotor | SRAM Centerline, 200mm |
| Front Brake | SRAM DB8 |
| Kurbelgarnitur | SRAM 70 Eagle DUB T-Type Crankset, 32t |
| Handlebars | Burgtec Alloy Bar -or- e13 TRS Base Bar |
| Vorbau | OneUp Enduro Stem, 42mm -or- e13 TRS Base Stem, 40mm |
| Sattel | SDG Bel-Air V3, Steel |
| Seatpost | SDG Tellis Dropper, 31.6 |
| Grips | Santa Cruz Bicycles House Grips |
| Frame | Carbon C 29" 150mm Travel VPP™ |
|---|---|
| Dämpfer | FOX Float X Performance, 230x57.5 |
| Gabel | FOX 36 Float Performance, Grip, 160mm |
| Schaltwerk | SRAM 90 Eagle T-Type, 12spd |
| Schalthebel | SRAM 90 Eagle T-Type, 12spd |
| Kassette | SRAM XS 1275 Eagle T-Type, 10-52t |
| Kette | SRAM GX Eagle T-Type, Flattop, 12spd |
| Kettenführung | N/A |
| Tretlager | SRAM DUB 73mm MTB Wide BB |
| Steuersatz | Cane Creek 50 IS Integrated Headset |
| Hinterreifen | Maxxis Minion DHR II 29"x2.4", 3C MaxxTerra, EXO+ |
| Vorderreifen | Maxxis Minion DHF 29"x2.5", 3C MaxxGrip, EXO |
| Nabe vorne | DT Swiss 370, 15x110, 6-Bolt, 28h |
| Felge vorne | Reserve 30|TR AL |
| Nabe hinten | DT Swiss 370, 12x148, XD, 6-Bolt, 36t, 28h |
| Felge hinten | Reserve 30|TR AL |
| Front Rotor | SRAM HS2 200mm |
| Rear Rotor | SRAM HS2 180mm |
| Front Brake | SRAM Maven Base |
| Kurbelgarnitur | SRAM 90 Eagle DUB T-Type Crankset, 32t |
| Handlebars | OneUp Aluminum Bar |
| Vorbau | OneUp Enduro Stem, 42mm |
| Sattel | SDG Bel-Air V3 Lux-Alloy |
| Seatpost | OneUp Dropper Post, 31.6 |
| Grips | Santa Cruz Bicycles House Grips |
Geometrie
Alle Einheiten in Millimeter oder Grad
| s | m | l | xl | xxl | |
|---|---|---|---|---|---|
| A. Reach (Hi/Lo) | 435/432 | 460/457 | 480/477 | 500/497 | 525/522 |
| B. Stack (Hi/Lo) | 623/625 | 632/634 | 641/643 | 659/661 | 668/670 |
| C. Lenkwinkel (Hi/Lo) | 64.2°/63.9° | 64.2°/63.9° | 64.2°/63.9° | 64.2°/63.9° | 64.2°/63.9° |
| K. Steuerrohrlänge (Hi/Lo) | 110 | 120 | 130 | 150 | 160 |
| G. Hinterbaulänge (Hi/Lo) | 434 | 436 | 439 | 442 | 445 |
| F. Front Center (Hi/Lo) | 771 | 800 | 825 | 853 | 883 |
| H. Tretlagerhöhe (Hi/Lo) | 344/341 | 344/341 | 344/341 | 344/341 | 344/341 |
| Bb drop front hi lo | 29/32 | 29/32 | 29/32 | 29/32 | 29/32 |
| Bb drop rear hi lo | 29/32 | 29/32 | 29/32 | 29/32 | 29/32 |
| E. Radstand (Hi/Lo) | 1206 | 1237 | 1264 | 1296 | 1328 |
| M. Oberrohrlänge (Hi/Lo) | 572 | 595 | 614 | 636 | 662 |
| L. Sitzrohrlänge (Hi/Lo) | 380 | 405 | 430 | 460 | 500 |
| D. Sitzwinkel (Hi/Lo) | 77.6°/77.3° | 77.9°/77.6° | 78.2°/77.9° | 78.3°/78° | 78.4/°78.1° |
| J. Überstandshöhe (Hi/Lo) | 721 | 723 | 725 | 727 | 731 |
Größen-Empfehlung
S
M
L
XL
XXL
154cm
5'1"
-
165cm
5'5"
Reach: 435mm
165cm
5'5"
-
175cm
5'9"
Reach: 460mm
175cm
5'9"
-
185cm
6'1"
Reach: 480mm
185cm
6'1"
-
193cm
6'4"
Reach: 500mm
193cm
6'4"
-
200cm
6'7"
Reach: 525mm
Schaltungs-Einstellung
| Frame Size | Flip Chip | Setup Key | Setup Cog | 30T | 32T | 34T | 36T |
|---|---|---|---|---|---|---|---|
| S | High | B | 7 | 116 | 116 | 118 | 118 |
| M | High | B | 7 | 116 | 116 | 118 | 118 |
| L | High | B | 7 | 116 | 116 | 118 | 118 |
| XL | High | B | 7 | 116 | 118 | 118 | 120 |
| XXL | High | B | 7 | 116 | 118 | 118 | 120 |
| S | Low | B | 7 | 116 | 116 | 118 | 118 |
| M | Low | B | 7 | 116 | 116 | 118 | 118 |
| L | Low | B | 7 | 116 | 118 | 118 | 120 |
| XL | Low | B | 7 | 116 | 118 | 118 | 120 |
| XXL | Low | B | 7 | 118 | 118 | 120 | 120 |
Explosionszeichnungen
Upper Link
| label | part_number | quantity | name | blurb |
|---|---|---|---|---|
| A | 29-27474 | 1 | Upper Link | |
| B | 11-12681 | 2 | 6900-2RS Bearing | |
| C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
| D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
| E | 11-12218 | 2 | 6902-2RS Max Bearing |
Laden
Lower Link
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 29-27473 | 1 | Lower Link | ||
| B | 11-17708 | 4 | 6902-1ZR Bearing | ||
| C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
| D | 26-19126 | 1 | 15x28 Bearing spacer | ||
| E | 26-17013 | 1 | 15x40.25 Bearing Spacer | ||
| F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
| G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 0.5 Nm |
Laden
Glovebox
| label | part_number | quantity | name | torque | blurb |
|---|---|---|---|---|---|
| A | 26-22843 | 1 | Glovebox lid | ||
| B | 26-25333 | 1 | Glovebox bezel | ||
| C | 26-23284 | 4 | M3x8 BHCS | 0.5 Nm | Apply Loctite 242 to threads |
| D | 30-23225 | 2 | Glovebox nut |
Laden
Rear Axle, Chainstay Protector, Derailleur Hanger, and Fender
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
| B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
| C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
| D | 30-27472 | 1 | Chainstay Protector | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| F | 30-21453 | 1 | Seatstay Protector | ||
| G | 30-23094 | 1 | Lower Link Fender | ||
| H | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
Laden
Upper Link and Lower Link Hardware
| label | part_number | quantity | torque | name | blurb |
|---|---|---|---|---|---|
| A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
| B | 08-22343 | 1 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
| C | 26-15633 | 3 | M6 Tapered Washer | Apply grease to surface | |
| D | 26-11817 | 3 | M6 Washer | ||
| E | 26-15947 | 3 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
| F | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| G | 08-16292 | 1 | 20 Nm | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| H | 26-15946 | 1 | 5.6 Nm | M5x20 SHCS | Apply Loctite 242 to threads |
| I | 26-12652 | 1 | M5 Washer | ||
| J | 26-27530 | 1 | M5 Tapered Washer | Apply grease to surface | |
| K | 08-27508 | 1 | 13.6Nm | Shock Mount Axle M10x63 | Apply Loctite 242 to threads only, apply grease to shaft only |
| L | 26-22461 | 1 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
| M | 26-21452 | 1 | M8x2 Flip Chip NDS | Apply grease to surface | |
| N | 26-21451 | 1 | M8x2 Flip Chip DS | Apply grease to surface |
Laden
Headtube Badge, Downtube Protector and Shuttle Guard
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 20-27756 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 30-23750 | 1 | Shuttle Guard Mount | ||
| C | 30-22560 | 1 | Shuttle Guard | ||
| D | 26-21249 | 2 | M4x8 BHCS | Apply grease to threads | 0.65 Nm |
| E | 30-27471 | 1 | Downtube Protector | ||
| F | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| G | 34-20201 | 1 | 36.4 Seat Collar |
Laden
Dateien
Wenn Du mehr Informationen zu Deinem Bike suchst, findest Du sie im Santa Cruz Bicycles-Benutzerhandbuch.