| Rear Shock Eye-to-Eye: | 7.875” / 200mm |
| Stroke: | 2.0”/51mm or 2.25"/ 57mm - Both are compatible - O.E. Air were 2.0” (3.8" R.WT.) - O.E. Coil were 2.25” (4.2" R.W.T.) ) |
| Mounting Bushing Width Front: | 22mm |
| Mounting Bushing Width Rear: | 41mm |
| Mounting Bolt Diameter Front: | 8mm |
| Mounting Bolt Diameter Rear: | 6mm |
| Leverage Ratio: | 1.9 : 1 |
| Rear Shock Setup: | Because it is highly likely the original rear shocks on older models are repaired/replaced/ upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 8-13mm at the shock shaft - This equates to approximately 15-25% of the total rear wheel travel. Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approx 25% less than rider weight, but again this varies by rear shock.For Coil rear shocks here is a rough spring size to weight guideline for average coil shocks.
This can vary based on rear shock model and manufacturer.100-130lbs - 225-250#140-160lbs - 300#170-200lbs - 350#210-240lbs - 400-450# |
