Overview

Frame Specs

Compatible Forks:	150-180mm single and dual crown forks 180mm travel max
Headtube/Headset:	1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post:	31.6mm - Minimum Insertion 100mm
Front Derailleur:	N/A - Single Front Chainring Only
BB Shell Width:	68mm - Threaded - ISO
Chainline Spec:	55mm
Recommended Max Tire Size:	2.5 - may vary by tire and rim model
Brakes:	Disc Brake only    - Rear disc mount uses Rock Shox Boxxer style disc adapter
Max Brake Rotor Size:	203mm
Rear Hub:	160 x 14mm (Through Axle) - Custom Hadley Racing Hub - Zero Dish
Seatpost Clamp:	34.9mm
Component Notes:	Component Notes:  The Super8.2 compatible with both 24” or 26” Dia. rear wheels - Adjust dropouts accordingly.  The Hadley/Super 8 rear hub dimensions are: Spoke holes - 32 Hub width - 35mm from center of hub to flange on both sides (Dishless wheel) Flange width - 60mm from eye to eye. Axle diameter - 14mm 68mm shell width - Use 73mm BB for chain tensioner mounting, BB Spindle length is 127-128mm for 55mm chainline.

Rear Shock Eye-to-Eye:	7.875"
Stroke:	2.25"
Mounting Bushing Width Front:	22mm
Mounting Bushing Width Rear:	41mm
Mounting Bolt Diameter Front:	8mm
Mounting Bolt Diameter Rear:	8mm
Leverage Ratio:	3.5 : 1
Rear Shock Setup:	Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.-Recommended sag is 12-15mm at the shock shaft - This equates to approximately 25% of the total rear wheel travel. Less sag = a firmer suspension feel.-For Coil rear shocks here is a rough spring size to weight guideline for average coil shocks. This can vary based on rear shock model and manufacturer.100-130lbs - 600#140-160lbs - 700#160-170lbs - 750#180-200lbs - 800#210-230lbs - 850#