Nomad 1

Spécificités du modèle

Compatible Forks	140mm to 180mm total travel 180mm travel max
Headtube/Headset	*See Component Notes
Seat Post	30.9mm - Minimum insertion 100mm
Front Derailleur	34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width	73mm - Threaded - ISO
Chainline Spec	50mm
Recommended Max Tire Size	2.5 - may vary by tire and rim model
Brakes	Disc Brake - ISO
Max Brake Rotor Size	203mm
Rear Hub	135mm x 10mm (QR style)
Seatpost Clamp	34.9mm
Component Notes	Nomad 1 uses 1-1/8" straight steerer fork with external cup headset. S.H.I.S. EC34/28.6 EC34/30Nomad 1.5 uses 1.5" straight steerer fork with external cup headset. S.H.I.S. EC49/38.1 EC49/40

Rear Shock Eye-to-Eye	8.5”
Stroke	2.5”
Mounting Bushing Width Front	22mm
Mounting Bushing Width Rear	22mm
Mounting Bolt Diameter Front	3/8” (9.53mm)
Mounting Bolt Diameter Rear	3/8” (9.53mm)
Leverage Ratio	*2.6 : 1
Rear Shock Setup	Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 15-20mm at the shock shaft - This equates to approximately 25-30% of the total rear wheel travel. Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approximately equal to rider weight (150lb rider = around 150psi) but again this varies by rear shock model.

Fastener	Description	Prep	Torque	Download
Lower Pivot Bolts	Allen Chainring Bolts (4)	Loctite 242	115 inch lbs	-
Upper Link To  Top Tube	Allen Chairing Bolts (2)	Loctite 242	115 inch lbs	-
Upper Link To  Swingarm	Nomad Upper Pivot Through Axle	Grease outer shaft Loctite 242 threads	40 inch lbs	-
Swingarm to Axle Pinch Bolts	M6 x 14 low socket head cap screw	Loctitie 242	70 inch lbs	-
Dropout to Chainstay	M8 X 1.25 X14 domed socket head cap screw	Loctite 242	110 inch lbs	-