Overview
| Model Version: | Juliana 1 |
| Production Start: | 2000 |
| Production End: | 2002 |
| Suspension/Pivot System: | Single Pivot |
| Material: | Aluminum - 6000 series |
| Rear Wheel Travel: | 100mm |
| Size Range: | S,M,L |
Frame Specs
| Compatible Forks: | 80mm to 100mm total travel 100mm travel max |
| Headtube/Headset: | 1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30 |
| Seat Post: | 27.2mm - Minimum insertion 100mm |
| Front Derailleur: | 31.8mm Top Pull/Top Swing (Low Clamp) |
| BB Shell Width: | 68mm - Threaded - ISO |
| Chainline Spec: | 50mm |
| Recommended Max Tire Size: | 2.1 - may vary by tire and rim model |
| Brakes: | Rim Brake and ISO Disc Brake Mounts |
| Max Brake Rotor Size: | 160mm |
| Rear Hub: | 135mm x 10mm (QR style) |
| Seatpost Clamp: | 31.8mm |
Shock Specs
| Rear Shock Eye-to-Eye: | Small and Med size frames - 6.5" / Large - 7.875" |
| Stroke: | Small and Med size frames - 1.5" / Large - 2.0" |
| Mounting Bushing Width Front: | 22mm |
| Mounting Bushing Width Rear: | 41mm |
| Mounting Bolt Diameter Front: | 8mm |
| Mounting Bolt Diameter Rear: | 6mm |
| Leverage Ratio: | Small and Med size frames - 2.6:1 / Large - 2:1 |
| Rear Shock Setup: | Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is - 6-8mm for the W.Small and W.Medium size frames and 8-11mm at the shock shaft for W.Large size frames - This equates to approximately 15-20% of the total rear wheel travel. Less sag = a firmer suspension feel. |
Torque Specs
| Fastener | Description | Prep | Torque | Download |
| Main Pivot Axle Bolts | Socket Head Cap Screw | Loctite 242 | 80 inch lbs | - |
| Front Shock Mounting Bolts | Socket Head Cap Screw | Loctite 242 | 40 inch lbs | - |
| Rear Shock Mounting Bolt | Socket Head Cap Screw | Nylock nut | 80 inch lbs | - |
| Main Pivot Bearing Clamp | Socket Head Cap Screw | Loctite 242 | 40 inch lbs | - |
| Brake Plate Mounting Bolts | Socket Head Cap Screw | Grease | 20 inch lbs | - |
Replacement Parts
| Propack Part Number: | 04-05007 |
