Highball
WIDE OPEN, DAWN 'TIL DUSK
When the trail calls for the direct drive efficiency that only a hardtail can offer, the Highball is the choice. This is a modern take on the simple machine that many still choose in order to put battery acid in their thighs and fire in their lungs when conquering a challenge. Whether you’re chasing medals, personal demons, or your riding buddies, this is a hardtail you’ll be happy to log long hours upon.
HARD ON THE THROTTLE
Light, quick, and snappy when you get on the pedals, the Highball is a race-bred XC hardtail with modern geometry.
SOFT ON THE BODY
A 27.2 seatpost combined with dropped seat stays isolate the top tube from high speed trail chatter, reducing feedback to your, uh, engine.
Design Details
Carbon Mastery
Choose between our top-end, lightweight Carbon CC frame or the value-minded Carbon C frame. Both come with a lifetime warranty.
Race Speed
29-inch wheels in XC racing offer faster rolling, enhanced traction on climbs, and improved stability on descents for peak performance.
Highball Gallery
Highball
Sizing & Geometry
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
| s | m | l | xl | |
|---|---|---|---|---|
| A. Reach | 415 | 440 | 460 | 490 |
| B. Stack | 596 | 605 | 614 | 633 |
| Head tube angle | 67° | 67° | 67° | 67° |
| L. Seat Tube Length | 405 | 430 | 470 | 530 |
| F. Front Center | 693 | 719 | 743 | 781 |
| H. BB Height | 313 | 313 | 313 | 313 |
| I. BB Drop | 60 | 60 | 60 | 60 |
| E. Wheelbase | 1119 | 1145 | 1169 | 1207 |
| G. Rear Center | 426 | 426 | 426 | 426 |
| K. Head Tube Length | 95 | 105 | 115 | 135 |
| M. Top Tube Length | 595 | 619 | 642 | 677 |
| D. Seat Tube Angle | 73.5° | 73.5° | 73.5° | 73.5° |
| J. Standover Height | 707 | 704 | 739 | 755 |
Highball
Setup & Support
Whether you’re the proud owner of a Highball or are just digging deep into the details you’ll find it all here.
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 26-20124 | 6 | M5x16 Water Bottle screw | Apply grease to threads | |
| C | 30-18552 | 1 | Downtube Protector | ||
| D | 26-20104 | 1 | DT Plug | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
| F | 34-20202 | 1 | 31.8 Seat Collar |
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
| B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
| C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
| D | 30-18551 | 1 | Chainstay Protector | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
Dig Deep
Sizing and support for the Highball
Geometry& Sizing
Setup& Support
Also Consider...
BUILT FOR...WHATEVER
See the Chameleon