| Rear Shock Eye-to-Eye: | 7.875” / 200mm |
| Stroke: | 2.0" / 50mm |
| Mounting Bushing Width Front: | 22mm |
| Mounting Bushing Width Rear: | 18mm |
| Mounting Bolt Diameter Front: | 8mm |
| Mounting Bolt Diameter Rear: | 3/8” (9.53mm) |
| Leverage Ratio: | * 2.3 : 1 - *Note: All VPP leverage ratios vary throughout the travel, so there is not a constant linear ratio. This is the average |
| Rear Shock Setup: | Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have.Contact the rear shock manufacturer for correct manual if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag for this model is 10-15mm at the shock shaft. This equates to approximately 20-30% of the total rear wheel travel. Less sag = a firmer suspension feel. |
