Rear Shock Setup |
Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.
The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is - 6-8mm for the W.Small and W.Medium size frames and 8-11mm at the shock shaft for W.Large size frames - This equates to approximately 15-20% of the total rear wheel travel. Less sag = a firmer suspension feel. |