V10 8 MY24
Rahmen-Spezifikationen
| Federungssystem | VPP |
|---|---|
| Federweg hinten | 208mm |
| Front Derailleur Mount | No compatibility |
| Steuersatz | IS41 upper/ IS41 lower (Reach Adjust) |
| Seat Post Diameter | 31.6mm |
| Sattelklemmung | 36.4mm |
| Dämpferlänge | 250mm |
| Dämpferhub | 75mm |
| Gabel-Kompatibilität | 200-203mm |
| Innenlager-Schale | 83mm Threaded |
| Maximale Reifenfreiheit | 2.5" |
| Maximale Kettenblattgröße | 36t |
| Dämpfer-Einbaumaß vorne | 30x8 |
| Dämpfer-Einbaumaß hinten | 30x8 |
| Einbaubreite hinten | 157x12 |
| Hintere Bremsaufnahme | 200mm or 220mm Post |
| Gabel-Offset | 52mm |
Ausstattungsvarianten
Wähle eine Ausstattungsvariante
| Gewicht | 36.81 lbs / 16.69 kg |
|---|---|
| Material | Carbon CC |
| Federweg | 208mm |
| Laufradgröße | MX (S, M, L) 29 (XL) |
| Dämpfer | FOX DHX2 Performance Elite Coil |
| Gabel | FOX 40 Float Performance, 203mm |
| Schaltwerk | SRAM GX DH, 7spd |
| Right Shifter | SRAM GX, 7spd |
| Kassette | SRAM PG720 DH, 11-25t |
| Kette | SRAM PC1110, 11spd |
| Kettenführung | E13 LG1+ Chainguide |
| Tretlager | SRAM DUB 83mm Threaded BB |
| Steuersatz | Cane Creek 40 IS41 Headset 1-1/8" |
| Hinterreifen | Maxxis Minion DHR II 27.5"x2.5", 3C, MaxxGrip, DH |
| Vorderreifen | Maxxis Minion DHR II 29"x2.5", 3C MaxxGrip, DH |
| Nabe vorne | Industry Nine 1/1 -or- DT 350, 20x110 Boost, 32h |
| Felge vorne | Reserve 30|HD AL 6069 -or- Raceface ARC 30 HD |
| Nabe hinten | Industry Nine 1/1 -or- DT 350, 12x157, HG, 32h |
| Felge hinten | Reserve 30|HD AL 6069 -or- Raceface ARC 30 HD |
| Bremsscheibe vorne | SRAM HS2 220mm |
| Bremsscheibe hinten | SRAM HS2 200mm |
| Bremsen | SRAM Code Bronze Stealth |
| Kurbelgarnitur | SRAM Descendant DH, 165mm, 36t |
| Lenker | OneUp Aluminum Bar, 35mm Rise, 800mm -OR- Burgtec RideWide DH Alloy Bar, 30mm Rise, 800mm |
| Vorbau | Santa Cruz Direct Mount 35x45/50 -OR- OneUp Direct Mount 35x45/50 |
| Sattel | Fizik Alpaca Gravita X5 Saddle |
| Sattelstütze | RaceFace Chester, 31.6 |
| Grips / Bar Tape | Burgtec Bartender Pro Grip |
| Gewicht | 35.6 lbs / 16.15 kg |
|---|---|
| Material | Carbon CC |
| Federweg | 208mm |
| Laufradgröße | MX (S, M, L) 29 (XL) |
| Dämpfer | Fox DHX2 Factory Coil |
| Gabel | FOX 40 Float Factory, 203mm |
| Schaltwerk | SRAM X01 DH, 7spd |
| Right Shifter | SRAM X01 DH |
| Kassette | SRAM X01 DH, 7spd |
| Kette | SRAM PC1170, 11spd |
| Kettenführung | E13 LG1+ Chainguide |
| Tretlager | SRAM DUB 83mm Threaded BB |
| Steuersatz | Cane Creek 40 IS41 Headset 1-1/8" |
| Hinterreifen | Maxxis Minion DHR II 27.5"x2.5", 3C, MaxxGrip, DH |
| Vorderreifen | Maxxis Minion DHR II 29"x2.5", 3C MaxxGrip, DH |
| Nabe vorne | Industry Nine 1/1 -or- DT 350, 20x110 Boost, 32h |
| Felge vorne | Reserve 30|HD AL 6069 -or- Raceface ARC 30 HD |
| Nabe hinten | Industry Nine 1/1 -or- DT 350, 12x157, HG, 32h |
| Felge hinten | Reserve 30|HD AL 6069 -or- Raceface ARC 30 HD |
| Bremsscheibe vorne | SRAM HS2 220mm |
| Bremsscheibe hinten | SRAM HS2 200mm |
| Bremsen | SRAM Code Silver Stealth |
| Kurbelgarnitur | SRAM X01 DH, DUB 83, 165mm, 36t |
| Lenker | OneUp Aluminum Bar, 35mm Rise, 800mm -OR- Burgtec RideWide DH Alloy Bar, 30mm Rise, 800mm |
| Vorbau | Santa Cruz Direct Mount 35x45/50 -OR- OneUp Direct Mount 35x45/50 |
| Sattel | Fizik Alpaca Gravita X5 Saddle |
| Sattelstütze | Burgtec Aluminum Post, 31.6 |
| Grips / Bar Tape | Burgtec Bartender Pro Grip |
| Gewicht | 9.73 lbs / 4.41 kg |
|---|---|
| Material | Carbon CC |
| Federweg | 208mm |
| Laufradgröße | MX (S, M, L) 29 (XL) |
| Dämpfer | Fox DHX2 Factory Coil |
Geometrie
Shock Position
Alle Einheiten in Millimeter oder Grad
| s | m | l | xl(29) | |
|---|---|---|---|---|
| Reach short mid long | 412-420-428 | 447-455-463 | 467-475-483 | 492-500-508 |
| Stack | 624 | 633 | 637 | 642 |
| Head tube angle | 63 | 63 | 63 | 63 |
| Steuerrohrlänge | 100 | 110 | 115 | 120 |
| G. Hinterbaulänge (Long/Mid/Short) | 440-445-450 | 445-450-455 | 450-455-460 | 455-460-465 |
| Front Center | 785 | 825 | 847 | 874 |
| Tretlagerhöhe | 356 | 356 | 356 | 356 |
| BB Drop Front | 17 | 17 | 17 | 17 |
| BB Drop Rear | -1 | -1 | -1 | 17 |
| Radstand | 1230 | 1275 | 1302 | 1334 |
| Sitzrohrlänge | 435 | 445 | 455 | 465 |
| Sitzwinkel | 77.9 | 77.4 | 77.3 | 77 |
| Überstandshöhe | 729 | 730 | 731 | 731 |
| s | m | l | xl | |
|---|---|---|---|---|
| Reach short mid long | 411-419-427 | 446-454-462 | 466-474-482 | 491-499-507 |
| Stack | 625 | 634 | 638 | 643 |
| Head tube angle | 62.9 | 62.9 | 62.9 | 62.9 |
| Steuerrohrlänge | 100 | 110 | 115 | 120 |
| G. Hinterbaulänge (Long/Mid/Short) | 440-445-451 | 446-451-456 | 451-456-461 | 456-461-466 |
| Front Center | 785 | 825 | 847 | 874 |
| Tretlagerhöhe | 353 | 353 | 353 | 353 |
| BB Drop Front | 19 | 19 | 19 | 19 |
| BB Drop Rear | 1 | 1 | 1 | 19 |
| Radstand | 1231 | 1275 | 1303 | 1335 |
| Sitzrohrlänge | 435 | 445 | 455 | 465 |
| Sitzwinkel | 77.8 | 77.3 | 77.2 | 76.9 |
| Überstandshöhe | 726 | 728 | 729 | 729 |
| s | m | l | xl | |
|---|---|---|---|---|
| Reach short mid long | 409-417-425 | 444-452-460 | 464-472-480 | 489-497-505 |
| Stack | 626 | 635 | 639 | 644 |
| Head tube angle | 62.7 | 62.7 | 62.7 | 62.7 |
| Steuerrohrlänge | 100 | 110 | 115 | 120 |
| G. Hinterbaulänge (Long/Mid/Short) | 440-445-452 | 446-451-456 | 451-456-461 | 456-461-466 |
| Front Center | 785 | 825 | 847 | 874 |
| Tretlagerhöhe | 351 | 351 | 351 | 351 |
| BB Drop Front | 21 | 21 | 21 | 21 |
| BB Drop Rear | 3 | 3 | 3 | 21 |
| Radstand | 1231 | 1276 | 1303 | 1335 |
| Sitzrohrlänge | 435 | 445 | 455 | 465 |
| Sitzwinkel | 77.6 | 77.1 | 77 | 76.7 |
| Überstandshöhe | 724 | 726 | 726 | 726 |
Größen-Empfehlung
S
M
L
XL
154cm
5'1"
-
167cm
5'6"
Reach: 412-425mm
165cm
5'5"
-
175cm
5'9"
Reach: 447-467mm
172cm
5'8"
-
185cm
6'1"
Reach: 467-480mm
182cm
6'
-
195cm
6'5"
Reach: 492-505mm
Explosionszeichnungen
Lower Link
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 29-26981 | 1 | Lower Link | ||
| B | 11-17708 | 4 | 6902-1ZR Bearing | ||
| C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
| D | 26-19126 | 1 | 15x28 Bearing spacer | ||
| E | 26-20880 | 1 | 15x32 Bearing Spacer | Apply grease to inner surface | |
| F | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | |
| G | 26-12678 | 1 | M6 Grease Fitting | 9 Nm |
Laden
Upper Link
| label | part_number | quantity | name | blurb |
|---|---|---|---|---|
| A | 29-26982 | 1 | Upper Link | |
| B | 11-12681 | 4 | 6900-2RS Bearing | |
| C | 26-15533 | 4 | M10x3 Washer | Apply grease to inner surface |
Laden
Rear Triangle Hardware, Brake Mount, and Rear Axle
| label | part_number | quantity | name | torque | blurb |
|---|---|---|---|---|---|
| A | 30-26670 | 1 | CS Protector | ||
| B | 26-15634 | 1 | RD Hanger Bolt | 12 Nm | Apply Loctite 242 to threads |
| C | 23-20089 | 1 | V10 RD Hanger Short | ||
| D | 23-24890 | 1 | V10 RD Hanger Neutral | ||
| E | 23-20090 | 1 | V10 RD Hanger Long | ||
| F | 26-11927 | 1 | M4x4 Set Screw | 1 Nm | Apply Loctite 242 to threads |
| G | 26-20087 | 1 | V10 NDS DO chip offset | ||
| H | 23-24889 | 1 | V10 NDS DO Chip Neutral | ||
| I | 08-24951 | 1 | V10 Rear axle 12x182 | Apply grease to shaft and threads | |
| J | 26-24963 | 1 | V10 Brake adapter 200 | ||
| K | 26-24962 | 1 | V10 Brake adapter 220 | ||
| L | 26-15947 | 2 | M6x20 SHCS | 9 Nm | Apply Loctite 242 to threads |
| M | 26-11817 | 2 | M6 Washer | ||
| N | 26-25330 | 1 | Cable loop FT DS | ||
| O | 26-25332 | 1 | Cable loop SA DS | ||
| P | 26-15939 | 4 | M3x12 BHCS | 0.5 Nm | Apply grease to treads |
| Q | 30-21453 | 1 | Seatstay Protector |
Laden
Upper and Lower Linkage Hardware
| label | part_number | quantity | torque | name | blurb |
|---|---|---|---|---|---|
| A | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |
| B | 26-27009 | 4 | 16 Nm | M8x22 Lowhead SHCS | Apply Loctite 242 to threads |
| C | 26-12682 | 4 | V10 Outer Bearing Washer | Apply grease to inner surface | |
| D | 26-22461 | 1 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
| E | 26-27123 | 1 | Flip Chip Neutral DS | Apply grease to surface | |
| F | 26-17065 | 1 | Flip Chip Offset NDS | Apply grease to surface | |
| G | 26-17064 | 1 | Flip Chip Offset DS | Apply grease to surface | |
| H | 26-27122 | 1 | Flip Chip Neutral NDS | Apply grease to surface | |
| I | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
| J | 26-15633 | 2 | M6 Tapered Washer | Apply grease to surface | |
| K | 26-11817 | 2 | M6 Washer | ||
| L | 26-15947 | 2 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
| M | 08-20879 | 1 | 20 Nm | Pivot Axle M15x72 | Apply Loctite 242 to threads only, apply grease to shaft only |
| N | 26-25329 | 1 | Cable loop FT NDS | ||
| O | 26-25331 | 1 | Cable loop SA NDS | ||
| P | 26-15939 | 3 | 0.5 Nm | M3x12 BHCS | Apply grease to treads |
Laden
Headset, Downtube Protector, Shuttle Guard, Seat Collar, and Rear Fender
| label | part_number | quantity | name | blurb | torque |
|---|---|---|---|---|---|
| A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 26-24897 | 1 | RAHS Upper Offset | Apply grease at frame inerface | |
| C | 26-24896 | 1 | RAHS Upper Neutral | Apply grease at frame inerface | |
| D | 26-24894 | 1 | RAHS Lower Neutral | Apply grease at frame inerface | |
| E | 26-24895 | 1 | RAHS Lower Offset | Apply grease at frame inerface | |
| F | 30-25026 | 1 | Fork Bumper DS | ||
| G | 30-25025 | 1 | Fork Bumper NDS | ||
| H | 26-23102 | 4 | M4x16 BHCS | Apply grease to threads | 0.65 Nm |
| I | 30-22560 | 1 | Shuttle Guard | ||
| J | 26-18382 | 4 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
| K | 30-25335 | 1 | Rear Fender | ||
| L | 30-20093 | 1 | DT Protector | ||
| M | 26-15939 | 4 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
| N | 34-20201 | 1 | 36.4 Seat Collar |
Laden
Dateien
Wenn Du mehr Informationen zu Deinem Bike suchst, findest Du sie im Santa Cruz Bicycles-Benutzerhandbuch.