Nomad
STOMPING GAPS AND STAMPING PASSPORTS
Load up the van, hit the road, climb a mountain, hammer it back down, huck the gap, throw the bike back in the van, and drive to the bike park for laps on laps. Hell, you could even roll up to the start line of the world’s wildest races. The Nomad’s forte is being ready and willing to go wherever, whenever. All it needs is a rider willing to press send.
MEGADESCENTS
ALL THE TRAVEL AND MX WHEELS
A bigger wheel up front, optimized geometry for good times, Glovebox storage, and the biggest-hitting VPP™ suspension come together to create a bike that inspires confidence in going wherever, whenever, and tackling whatever’s in your way.
SINGLE-CROWN, DOUBLE BLACK
VPP™ suspension strikes the ideal balance between pedaling efficiency and bump-chomping prowess. The Nomad excels at absorbing the biggest hits, allowing riders to charge harder and with greater confidence in the toughest terrain. Plus, its efficiency means reaching the highest, best trails is never a chore.
Filters:
Nomad X0 AXS RSV
CC carbon frame, full SRAM X0 T-TYPE electronic drivetrain, top spec suspension and SRAM Maven Silver Stealth brakes, plus legendary carbon Reserve wheels on Industry Nine hubs.
Nomad X0 AXS
CC carbon frame, full SRAM X0 T-TYPE electronic drivetrain, top spec suspension and Industry Nine hubs and powerful SRAM Maven Silver Stealth brakes
Nomad GX AXS
Full SRAM GX Eagle electronic Transmission and the most powerful SRAM Maven brakes.
Nomad S
Upgraded wheels, headset, and dropper post. Suspension with more adjustment, SRAM Eagle cable-operated drivetrain and 4-piston SRAM brakes.
Nomad R
Base model with same tires and big rotors as all Nomads. Quality suspension, just without all the external tuning dials.
Deals On Nomads
Current OffersDesign Details
Nomad
Sizing & Geometry
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
s | m | l | xl | xxl | |
---|---|---|---|---|---|
A. Reach (Hi/Lo) | 430/427 | 455/452 | 475/472 | 495/492 | 520/517 |
B. Stack (Hi/Lo) | 616/618 | 625/627 | 638/640 | 656/658 | 670/672 |
C. Head Tube Angle (Hi/Lo) | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 | 63.8/63.5 |
D. Seat Tube Angle (Hi/Lo) | 77.2/77 | 77.4/77.2 | 77.9/77.6 | 77.8/77.5 | 77.7/77.5 |
E. Wheelbase (Hi/Lo) | 1209/1209 | 1239/1240 | 1269/1270 | 1301/1302 | 1336/1337 |
F. Front Center (Hi/Lo) | 770/770 | 799/799 | 826/826 | 855/855 | 886/886 |
G. Rear Center (Hi/Lo) | 439/440 | 440/441 | 443/444 | 446/447 | 450/451 |
H. BB Height (Hi/Lo) | 346/343 | 346/343 | 346/343 | 346/343 | 346/343 |
Bb drop front hi lo | 27/30 | 27/30 | 27/30 | 27/30 | 27/30 |
Bb drop rear hi lo | 8/11 | 8/11 | 8/11 | 8/11 | 8/11 |
J. Standover Height (Hi/Lo) | 709/705 | 716/713 | 723/719 | 722/717 | 725/720 |
K. Head Tube Length | 90/90 | 100/100 | 115/115 | 135/135 | 150/150 |
L. Seat Tube Length | 380/380 | 405/405 | 430/430 | 460/460 | 500/500 |
M. Top Tube Length (Hi/Lo) | 570/571 | 594/594 | 612/613 | 637/638 | 666/667 |
Nomad
Setup & Support
Whether you’re the proud owner of a Nomad or are just digging deep into the details you’ll find it all here.
label | name | quantity | part_number | blurb |
---|---|---|---|---|
A | 29-23753 | 1 | Upper Link | |
B | 11-12681 | 2 | 6900-2RS Bearing | |
C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
E | 11-12218 | 2 | 6902-2RS Max Bearing | |
F | 26-17013 | 1 | 15x40.25 Bearing Spacer |
label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | 29-23751 | 1 | Lower Link | ||
B | 11-17708 | 4 | 6902-1ZR Bearing | ||
C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
D | 26-19126 | 1 | 15x28 Bearing spacer | ||
E | 26-17013 | 1 | 15x40.25 Bearing Spacer | ||
F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush |
label | name | quantity | part_number | torque | blurb |
---|---|---|---|---|---|
A | 26-22843 | 1 | Glovebox lid | ||
B | 26-25333 | 1 | Glovebox bezel | ||
C | 26-23284 | 4 | M3x8 BHCS | 0.5 Nm | Apply Loctite 242 to threads |
D | 30-23225 | 2 | Glovebox nut | ||
E | 26-22358 | 1 | M3x6 | 0.6 Nm | Apply Loctite 242 to threads |
F | 30-22620 | 1 | Storage Bulkhead | Install inside Downtube |
label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | 08-22208 | 1 | Rear axle 12x168.5 | Apply grease to shaft and threads | |
B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
D | 30-20361 | 1 | Chainstay Protector | ||
E | 26-15939 | 1 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
F | 30-21453 | 1 | Seatstay Protector | ||
G | 49-21567 | 1 | Lower Link Fender | ||
H | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
label | name | quantity | torque | part_number | blurb |
---|---|---|---|---|---|
A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
B | 26-22461 | 2 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
C | 26-21452 | 1 | M8x2 Flip Chip NDS | Apply grease to surface | |
D | 26-21451 | 1 | M8x2 Flip Chip DS | Apply grease to surface | |
E | 26-15947 | 2 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
F | 26-11817 | 2 | M6 Washer | ||
G | 26-15633 | 2 | M6 Tapered Washer | Apply grease to surface | |
H | 08-22343 | 1 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
I | 08-16292 | 1 | 20 Nm | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
J | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
B | 30-23750 | 1 | Shuttle Guard Mount | ||
C | 30-22560 | 1 | Shuttle Guard | ||
D | 26-21249 | 2 | M4x8 BHCS | Apply grease to threads | 0.65 Nm |
E | 30-23718 | 1 | Downtube Protector | ||
F | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
G | 34-20201 | 1 | 36.4 Seat Collar |
Dig Deep
Sizing and support for the Nomad
Geometry& Sizing
Setup& Support
“Yes, it’s very good.”
“This is an excellent bike that performs exceptionally well on all the trails I love to ride.”
“If the Megatower is pitched as a privateer enduro race bike where efficiency and speed against the clock is the priority, the Nomad feels very much like a seasonaire’s bike with a focus on being built for reliable fun over countless bike park laps”
SO WHAT'S THE NOMAD ALL ABOUT?
SO WHAT'S THE NOMAD ALL ABOUT?
CAN'T BE BOTHERED TO READ OR STILL LOOKING FOR ANSWERS ON THE NOMAD? WATCH AND LEARN