Bullit GX AXS
Build Kit & Specs
*Please note: we make every effort to ensure accuracy of spec information, but they are subject to change.
| Frame | |
|---|---|
| Material | |
| Features | |
| Suspension | |
| Fork | |
| Shock | |
| Drivetrain | |
| Rear Derailleur | |
| Shifter | |
| Crankset | |
| Cassette | |
| Chain | |
| Bottom Bracket | |
| Brakes | |
| Brakes | |
| Front Rotor | |
| Rear Rotor | |
| Cockpit | |
| Handlebars | |
| Stem | |
| Grips | |
| Headset | |
| Seatpost | |
| Saddle | |
| Wheels | |
| Front Rim | |
| Front Hub | |
| Front Tire | |
| Rear Rim | |
| Rear Hub | |
| Rear Tire | |
| Valves | |
| Ebike | |
| Battery | |
| Drive Unit | |
| Specs | |
| Headset | |
| Seat Post Diameter | |
| Seat Clamp Diameter | |
| Rear Brake Mount | |
| Bottom Bracket Shell | |
| Max Tire Clearance | |
| Max Chainring Size | |
| Water Bottle Mounts | |
| Shock Length | |
| Shock Stroke | |
| Shock Bushing Sizes | |
| Shock Bushing Sizes | |
| Shock Mounting Hardware Upper | |
| Shock Mounting Hardware Lower | |
| Fork Offset |
Bullit GX AXS
Sizing & Geometry
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
| m | l | xl | xxl | |
|---|---|---|---|---|
| A. Reach | 450 | 475 | 495 | 515 |
| B. Stack | 621 | 630 | 648 | 670.4 |
| Head tube angle | 64° | 64° | 64° | 64° |
| L. Seat Tube Length | 405 | 430 | 460 | 500 |
| F. Front Center | 789.4 | 818.8 | 847.5 | 878.5 |
| H. BB Height | 348 | 348 | 348 | 348 |
| I. BB Drop | 25.5/6.5 | 25.5/6.5 | 25.5/6.5 | 25.5/6.5 |
| E. Wheelbase | 1238.5 | 1267.9 | 1296.7 | 1327.7 |
| G. Rear Center | 449 | 449 | 449 | 449 |
| K. Head Tube Length | 100 | 110 | 130 | 155 |
| M. Top Tube Length | 591.3 | 619.2 | 644.9 | 672.1 |
| D. Seat Tube Angle | 77.2° | 77.1° | 77° | 76.8° |
| J. Standover Height | 748 | 747 | 745 | 745 |
Bullit GX AXS
Setup & Support
Whether you’re the proud owner of a Bullit or are just digging deep into the details you’ll find it all here.
| Rider weight lbs | Rider weight kgs | Pressure | Rebound single |
|---|---|---|---|
| 100 | 45 | 47 | 12 |
| 120 | 54 | 55 | 11 |
| 140 | 64 | 64 | 10 |
| 160 | 73 | 72 | 9 |
| 180 | 82 | 80 | 8 |
| 200 | 91 | 88 | 6 |
| 220 | 100 | 96 | 4 |
| 240 | 109 | 104 | 3 |
| Rider weight lbs | Rider weight kgs | Pressure | Sag | Rebound single |
|---|---|---|---|---|
| 100 | 45 | 100 | 29-32%, 18-20mm | 7 |
| 120 | 54 | 125 | 29-32%, 18-20mm | 7 |
| 140 | 63 | 145 | 29-32%, 18-20mm | 7 |
| 160 | 72 | 170 | 29-32%, 18-20mm | 6 |
| 180 | 81 | 190 | 29-32%, 18-20mm | 6 |
| 200 | 90 | 215 | 29-32%, 18-20mm | 6 |
| 220 | 99 | 235 | 29-32%, 18-20mm | 5 |
| 240 | 108 | 260 | 29-32%, 18-20mm | 5 |
| 260 | 117 | 280 | 29-32%, 18-20mm | 5 |
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
| B | 72-21292 | 1 | Shimano BM-E8030 | For EP801 use battery mount BM-EN801 (72-24168) | |
| C | 78-21554 | 1 | Shimano BT-E8036 | For EP801 use battery BT-EN806 (78-24169) | |
| D | 26-18382 | 6 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| E | 30-22329 | 1 | Bullit 3C battery cover | ||
| F | 26-15939 | 2 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| G | 30-22358 | 1 | DU Protector | ||
| H | 26-22358 | 1 | M3x6 | Apply Loctite 242 to threads | 0.6 Nm |
| I | 26-19207 | 2 | Hose Grommet | ||
| J | 34-20201 | 2 | 36.4 Seat Collar |
| label | name | quantity | torque | part_number | blurb |
|---|---|---|---|---|---|
| A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
| B | 26-21360 | 2 | Water Bottle Screw | ||
| C | 08-22343 | 2 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
| D | 26-15633 | 3 | M6 Tapered Washer | Apply grease to surface | |
| E | 26-11817 | 3 | M6 Washer | ||
| F | 26-15947 | 3 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
| G | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |
| H | 72-21270 | 1 | Shimano EW-CP100 | Charge port for EP8 & EP801 | |
| I | 26-15939 | 2 | 0.1 Nm | M3x12 BHCS | Apply Loctite 242 to threads |
| J | 26-21223 | 1 | 12.5 Nm | M8x20 BHCS | Apply Loctite 242 to threads |
| K | 72-21559 | 1 | Shimano DC-EP800 | For EP801 use DC-EP801 (72-24172) | |
| L | 08-20879 | 1 | 20 Nm | Pivot Axle M15x72 | Apply Loctite 242 to threads only, apply grease to shaft only |
| M | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
| B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
| C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
| D | 30-21226 | 1 | Chainstay Protector | ||
| E | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| F | 30-20189 | 1 | Chainstay Protector | ||
| G | 26-21223 | 3 | M8x20 BHCS | Apply Loctite 242 to threads | 12.5 Nm |
| H | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
| I | 49-21567 | 1 | Lower Link Fender | ||
| J | 30-21453 | 1 | Seatstay Protector | ||
| K | 26-21361 | 1 | Hose Grommet Single | ||
| L | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
| M | 72-22286 | 1 | Shimano Speed Sensor | Use for both EP8 & EP801 |
| label | name | quantity | part_number | blurb |
|---|---|---|---|---|
| A | 29-22342 | 1 | Upper Link | |
| B | 11-12681 | 2 | 6900-2RS Bearing | |
| C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
| D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
| E | 11-12218 | 2 | 6902-2RS Max Bearing | |
| F | 26-17013 | 1 | 15x40.25 Bearing Spacer |
| label | name | quantity | part_number | blurb | torque |
|---|---|---|---|---|---|
| A | 29-22341 | 1 | Lower Link | ||
| B | 11-17708 | 4 | 6902-1ZR Bearing | ||
| C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
| D | 26-20880 | 1 | 15x32 Bearing Spacer | ||
| E | 26-17707 | 1 | 15x48 Bearing spacer | ||
| F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
| G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 0.5 Nm |
Bullit GX AXS
Get access to the exclusive SCB Owners Club which gives you access to added levels of rider support, treats, opportunities and benefits. Join the club today for free! It takes just five minutes to receive a lifetime of membership perks.
Learn MoreWe build Santa Cruz bicycles to be durable and long lasting, and then back them up with legendary support and a warranty of the highest standard.
Santa Cruz Bicycles offers free replacement pivot bearings to the original owner for as long as they own their bike.
If you feel the pull of gravity-riding but want extra push to get to the top, the Bullit is for you. Specifically designed to be at home on the biggest-hitting terrain but with the added boost of an electric motor to drop you at the the drop-in of the wildest trails, the Bullit is the nearest thing to owning a downhill bike and a chairlift.
Dig Deep
Build kit& Specs
Geometry& Sizing
Setup& Support
Other Builds
Bullit GX AXS Coil
Full SRAM GX Eagle electronic Transmission and SRAM Level brakes.
Bullit R
Base model with same top-tier motor, tires, big rotors as all Bullits. Quality suspension, just without all the external tuning dials.
Bullit S
Upgraded wheels, brakes, stem, carbon bar, headset, and dropper post. More adjustment on suspension and SRAM Eagle cable-operated drivetrain.
Bullit X0 AXS RSV
CC carbon frame, full SRAM X0 Transmission electronic drivetrain, top spec suspension and carbon Reserve DH rims on DT Swiss hubs.
Bullit X0 AXS RSV Coil
CC carbon frame, full SRAM X0 Transmission electronic drivetrain, top spec suspension and carbon Reserve DH rims on DT Swiss hubs.