Nomad 1

Model Version 1
Production Start 2005
Production End 2008
Suspension/Pivot System VPP - Virtual Pivot Point
Material Aluminum - 6000 series
Rear Wheel Travel 165mm
Size Range S,M,L,XL

Model Specs

Compatible Forks 140mm to 180mm total travel 180mm travel max
Headtube/Headset *See Component Notes
Seat Post 30.9mm - Minimum insertion 100mm
Front Derailleur 34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width 73mm - Threaded - ISO
Chainline Spec 50mm
Recommended Max Tire Size 2.5 - may vary by tire and rim model
Brakes Disc Brake - ISO
Max Brake Rotor Size 203mm
Rear Hub 135mm x 10mm (QR style)
Seatpost Clamp 34.9mm
Component Notes Nomad 1 uses 1-1/8" straight steerer fork with external cup headset. S.H.I.S. EC34/28.6 EC34/30Nomad 1.5 uses 1.5" straight steerer fork with external cup headset. S.H.I.S. EC49/38.1 EC49/40

Shock Specs

Rear Shock Eye-to-Eye 8.5”
Stroke 2.5”
Mounting Bushing Width Front 22mm
Mounting Bushing Width Rear 22mm
Mounting Bolt Diameter Front 3/8” (9.53mm)
Mounting Bolt Diameter Rear 3/8” (9.53mm)
Leverage Ratio *2.6 : 1
Rear Shock Setup Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.
The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 15-20mm at the shock shaft - This equates to approximately 25-30% of the total rear wheel travel. Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approximately equal to rider weight (150lb rider = around 150psi) but again this varies by rear shock model.

Geometry

Torque Specs

Fastener Description Prep Torque Download
Lower Pivot Bolts Allen Chainring Bolts (4) Loctite 242 115 inch lbs -
Upper Link To 
Top Tube Allen Chairing Bolts (2) Loctite 242 115 inch lbs -
Upper Link To 
Swingarm Nomad Upper Pivot Through Axle Grease outer shaft
Loctite 242 threads 40 inch lbs -
Swingarm to Axle Pinch Bolts M6 x 14 low socket head cap screw Loctitie 242 70 inch lbs -
Dropout to Chainstay M8 X 1.25 X14 domed socket head cap screw Loctite 242 110 inch lbs -

Exploded Diagrams

Files

If you're looking for more information about your bike check our the Santa Cruz Bicycles Owner's Manual.