VP Free 1

Spécificités du modèle

Compatible Forks	160mm to 200mm total travel - 203mm travel max
Headtube/Headset	1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post	30.9mm - Minimum insertion 100mm
Front Derailleur	34.9mm-Top Pull/Top Swing-Shimano Saint model #M815 For Double CR - 34.9mm-Top Pull/Top Swing-Shimano Saint model#M805 For Triple CR
BB Shell Width	73mm - Threaded - ISO
Chainline Spec	55mm
Recommended Max Tire Size	2.7 - may vary by tire and rim model
Brakes	Disc Brake - ISO
Max Brake Rotor Size	203mm
Rear Hub	150mm x 12mm Through-Axle
Seatpost Clamp	34.9mm
Component Notes	Component Notes:For modern external bearing type BB/Cranks with some older generation VP-Free frames - You will have to face the bb shell to use this setup, as there is a ridge of aluminum on the non-drive side of the shell that will interfere with the external cups.Not really a big deal to face them off if you have the correct tool (talk to your bike shop).Later models were made compatible with external bearing type BB.

Rear Shock Eye-to-Eye	8.75"
Stroke	2.75"
Mounting Bushing Width Front	22mm
Mounting Bushing Width Rear	22mm
Mounting Bolt Diameter Front	8mm
Mounting Bolt Diameter Rear	8mm
Leverage Ratio	3.1 : 1
Rear Shock Setup	Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it. The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 18-22mm at the shock shaft - This equates to approximately 25-30% of the total rear wheel travel. Less sag = a firmer suspension feel.For Coil rear shocks here is a rough spring size to weight guideline for average coil shocks. This can vary based on rear shock model and manufacturer.100-130lbs - 350#140-160lbs - 400#160-170lbs - 400#180-200lbs - 450#210-230lbs - 500#

Fastener	Description	Prep	Torque	Download
Lower Pivot Bolts	Lower Main Pivot Chainring Bolts (4)	Loctite 242	115 inch lbs	-
Upper Link Bolts	Upper Pivot Chainring Bolts (4)	Loctite 242	115 inch lbs	-
Dropout/Derailleur Hanger	Dropout Chainring Mounting Bolts/Nuts (2 bolts/2nuts)	Loctite 242	115 inch lbs	-
Rear Hub Axle	150 x 12mm Axle	Grease	120 inch lbs	-
Frame to Shock  Mounting Bolt	M8 x 50 socket head cap screw (1)	Loctite 242	190 inch lbs	-