Heckler 1
| Model Version | 1 |
|---|---|
| Production Start | 1996 |
| Production End | 1997 |
| Suspension/Pivot System | Single Pivot |
| Material | Aluminum - 6000 series |
| Rear Wheel Travel | 100mm |
| Size Range | 14", 16", 18", 20". 22" |
Spécificités du modèle
| Compatible Forks | 63mm to 100mm - 100mm travel max |
|---|---|
| Headtube/Headset | 1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30 |
| Seat Post | 28.6mm - Minimum insertion 100mm |
| Front Derailleur | 31.8mm Top Pull/Bottom Swing (High Clamp) |
| BB Shell Width | 68mm - Threaded - ISO |
| Chainline Spec | 50mm |
| Recommended Max Tire Size | 2.1 - may vary by tire and rim model |
| Brakes | Rim Brake |
| Rear Hub | 135mm x 10mm (QR style) |
| Seatpost Clamp | 31.8mm |
Spécificités de l'amortisseur
| Rear Shock Eye-to-Eye | 7.875” / 200mm |
|---|---|
| Stroke | 2.0”/51mm or 2.25"/ 57mm - Both are compatible - O.E. Air were 2.0” (3.8" R.WT.) - O.E. Coil were 2.25” (4.2" R.W.T.) ) |
| Mounting Bushing Width Front | 22mm |
| Mounting Bushing Width Rear | 41mm |
| Mounting Bolt Diameter Front | 8mm |
| Mounting Bolt Diameter Rear | 6mm |
| Leverage Ratio | 1.9 : 1 |
| Rear Shock Setup | Because it is highly likely the original rear shocks on older models are repaired/replaced/ upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have. Contact the rear shock manufacturer for info if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag is 8-13mm at the shock shaft - This equates to approximately 15-25% of the total rear wheel travel. Less sag = a firmer suspension feel.For Air rear shocks, set the air pressure to match the recommended sag. Typically for this model the PSI is approx 25% less than rider weight, but again this varies by rear shock.For Coil rear shocks here is a rough spring size to weight guideline for average coil shocks. This can vary based on rear shock model and manufacturer.100-130lbs - 225-250#140-160lbs - 300#170-200lbs - 350#210-240lbs - 400-450# |
Géométries
Couple de serrage
| Fastener | Description | Prep | Torque | Download |
|---|---|---|---|---|
| Main pivot axle and aluminum nuts | Loctite 242 | 80 inch lbs | - | |
| Shock to frame - socket head cap screws (2) | Loctite 242 | 40 inch lbs | - | |
| Shock to swingarm - socket head cap screw / nylock nut | None - nylock nut | 80 inch lbs | - | |
| S/A brake plate socket head cap screws (4) | Grease | 20 inch lbs | - | |
| Main pivot bearing pinch bolts (2) | Loctite 242 | 40 inch lbs | - |