Megatower X0 AXS Coil 2024
Build Kit & Specs
*Please note: we make every effort to ensure accuracy of spec information, but they are subject to change.
Frame | |
---|---|
Material | |
Features | |
Suspension | |
Fork | |
Shock | |
Drivetrain | |
Rear Derailleur | |
Shifter | |
Crankset | |
Crank Length | |
Cassette | |
Chain | |
Bottom Bracket | |
Brakes | |
Brakes | |
Front Rotor | |
Rear Rotor | |
Cockpit | |
Handlebars | |
Stem | |
Stem Length | |
Grips | |
Headset | |
Seatpost | |
Dropper Length | |
Saddle | |
Wheels | |
Front Rim | |
Front Hub | |
Front Tire | |
Rear Rim | |
Rear Hub | |
Rear Tire | |
Valves | |
Ebike | |
Battery | |
Drive Unit | |
Specs | |
Headset | |
Seat Post Diameter | |
Seat Clamp Diameter | |
Rear Brake Mount | |
Max Rotor Size | |
Bottom Bracket Shell | |
UDH Compatible | |
Max Tire Clearance | |
Max Chainring Size | |
Water Bottle Mounts | |
Shock Length | |
Shock Stroke | |
Shock Bushing Size Front | |
Shock Bushing Size Rear | |
Shock Mounting Hardware Upper | |
Shock Mounting Hardware Lower | |
Fork Offset |
Megatower X0 AXS Coil 2024
Sizing & Geometry
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
s | m | l | xl | xxl | |
---|---|---|---|---|---|
A. Reach (Hi/Lo) | 430/427 | 455/452 | 475/472 | 495/492 | 520/517 |
B. Stack (Hi/Lo) | 616/618 | 625/627 | 638/640 | 656/658 | 670/672 |
C. Head Tube Angle (Hi/Lo) | 63.8°/63.5° | 63.8°/63.5° | 63.8°/63.5° | 63.8°/63.5° | 63.8°/63.5° |
L. Seat Tube Length (Hi/Lo) | 380 | 405 | 430 | 460 | 500 |
F. Front Center (Hi/Lo) | 770 | 799 | 826 | 855 | 886 |
H. BB Height (Hi/Lo) | 346/342.5 | 346/342.5 | 346/342.5 | 346/342.5 | 346/342.5 |
I. BB Drop (Hi/Lo) | 26.5/30 | 26.5/30 | 26.5/30 | 26.5/30 | 26.5/30 |
E. Wheelbase (Hi/Lo) | 1206 | 1236/1237 | 1266 | 1298 | 1333/1334 |
G. Rear Center (Hi/Lo) | 436/437 | 437/438 | 440/441 | 443/444 | 447/448 |
K. Head Tube Length (Hi/Lo) | 90 | 100 | 115 | 135 | 150 |
M. Top Tube Length (Hi/Lo) | 570 | 594/595 | 613 | 637/638 | 666/667 |
D. Seat Tube Angle (Hi/Lo) | 77.24°/77.0° | 77.42°/77.2° | 77.8°/77.5° | 77.8°/77.5° | 77.8°/77.5° |
J. Standover Height (Hi/Lo) | 709/705 | 716/712 | 723/718 | 722/717 | 724/720 |
Megatower X0 AXS Coil 2024
Setup & Support
Whether you’re the proud owner of a Megatower or are just digging deep into the details you’ll find it all here.

Rider Weight (lbs) | Rider Weight (kgs) | Pressure (psi) | Rebound (from closed) | Compression (L/H from middle) |
---|---|---|---|---|
100 | 45 | 29 | 15 | -2,middle |
120 | 54 | 37 | 13 | -2,middle |
140 | 64 | 45 | 12 | -2,middle |
160 | 73 | 54 | 11 | -2,middle |
180 | 82 | 62 | 10 | -2,middle |
200 | 91 | 70 | 9 | -2,middle |
220 | 100 | 78 | 8 | -2,middle |
240 | 109 | 86 | 6 | -2,middle |
Rider Weight (lbs) | Rider Weight (kgs) | Spring Rate | Sag | Preload | Rebound (from closed) | Compression (L/H from middle) |
---|---|---|---|---|---|---|
100 | 45 | 250 | 29-32%, 18-20mm | 1-2 turns | 9 | -2, middle |
120 | 54 | 300 | 29-32%, 18-20mm | 1-2 turns | 9 | -2, middle |
140 | 64 | 350 | 29-32%, 18-20mm | 1-2 turns | 8 | -2, middle |
160 | 73 | 400 | 29-32%, 18-20mm | 1-2 turns | 8 | -2, middle |
180 | 82 | 450 | 29-32%, 18-20mm | 1-2 turns | 7 | -2, middle |
200 | 91 | 500 | 29-32%, 18-20mm | 1-2 turns | 6 | -2, middle |
220 | 100 | 550 | 29-32%, 18-20mm | 1-2 turns | 6 | -2, middle |
240 | 109 | 600 | 29-32%, 18-20mm | 1-2 turns | 5 | -2, middle |
label | part_number | quantity | name | blurb | torque |
---|---|---|---|---|---|
A | 29-23752 | 1 | Lower Link | ||
B | 11-17708 | 4 | 6902-1ZR Bearing | ||
C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
D | 26-19126 | 1 | 15x28 Bearing spacer | ||
E | 26-17013 | 1 | 15x40.25 Bearing Spacer | ||
F | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | |
G | 26-12678 | 1 | M6 Grease Fitting | 9 Nm |

label | part_number | quantity | name | blurb |
---|---|---|---|---|
A | 29-23753 | 1 | Upper Link | |
B | 11-12681 | 2 | 6900-2RS Bearing | |
C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
D | 11-12218 | 2 | 6902-2RS Max Bearing | |
E | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
F | 26-17013 | 1 | 15x40.25 Bearing Spacer |

label | part_number | quantity | name | blurb | torque |
---|---|---|---|---|---|
A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
D | 30-20361 | 1 | Chainstay Protector | ||
E | 26-15939 | 1 | M3x12 BHCS | Apply grease to treads | 0.5 Nm |
F | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
G | 49-21567 | 1 | Lower Link Fender | ||
H | 30-21453 | 1 | Seatstay Protector |

label | part_number | quantity | torque | name | blurb |
---|---|---|---|---|---|
A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
B | 26-22461 | 2 | 20 Nm | M8x45 Shock Bolt | Apply Loctite 242 to threads |
C | 08-22343 | 1 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
D | 08-16291 | 1 | 20 Nm | Pivot axle M15x68.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
E | 08-16292 | 1 | 20 Nm | Pivot axle M15x80.5 | Apply Loctite 242 to threads only, apply grease to shaft only |
F | 26-15633 | 3 | M6 Tapered Washer | Apply grease to surface | |
G | 26-11817 | 3 | M6 Washer | ||
H | 26-15947 | 3 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
I | 26-21452 | 1 | M8x2 Flip Chip NDS | Apply grease to surface | |
J | 26-21451 | 1 | M8x2 Flip Chip DS | Apply grease to surface |

label | part_number | quantity | name | blurb | torque |
---|---|---|---|---|---|
A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
B | 30-22560 | 1 | Shuttle Guard | ||
C | 30-23750 | 1 | Shuttle Guard Mount | ||
D | 26-21249 | 2 | M4x8 BHCS | Apply grease to threads | 0.65 Nm |
E | 30-23718 | 1 | Downtube Protector | ||
F | 26-18382 | 2 | M4x12 BHC | Apply grease to treads | 0.65 Nm |
G | 30-23225 | 2 | Glovebox nut | ||
H | 26-25333 | 1 | Glovebox bezel | ||
I | 26-23284 | 4 | M3x8 BHCS | Apply Loctite 242 to threads | 0.5 Nm |
J | 26-22843 | 1 | Glovebox lid | ||
K | 26-22358 | 1 | M3x6 | Apply Loctite 242 to threads | 0.6 Nm |

Progettata per garantire la massima velocità azzerando i rischi quando si corre alla cieca o si affrontano giri ripetuti. La Megatower è in grado di mostrare i muscoli che derivano dalle sorelle maggori del DH pur mantenendo un'impressionante capacità di pedalata. Queste caratteristiche consolidano la sua reputazione di bicicletta ideale per le gare enduro, i giri nei park o le "big gravity rides".
Dig Deep

Geometry
& Sizing

Build kit
& Specs
