Bullit X0 AXS RSV
Build Kit & Specs
*Please note: we make every effort to ensure accuracy of spec information, but they are subject to change.
Frame | |
---|---|
Material | |
Features | |
Suspension | |
Fork | |
Shock | |
Drivetrain | |
Rear Derailleur | |
Shifter | |
Crankset | |
Crank Length | |
Cassette | |
Chain | |
Bottom Bracket | |
Brakes | |
Brakes | |
Front Rotor | |
Rear Rotor | |
Cockpit | |
Handlebars | |
Stem | |
Stem Length | |
Grips | |
Headset | |
Seatpost | |
Dropper Length | |
Saddle | |
Wheels | |
Front Rim | |
Front Hub | |
Front Tire | |
Rear Rim | |
Rear Hub | |
Rear Tire | |
Valves | |
Ebike | |
Battery | |
Drive Unit | |
Specs | |
Headset | |
Seat Post Diameter | |
Seat Clamp Diameter | |
Rear Brake Mount | |
Max Rotor Size | |
Bottom Bracket Shell | |
UDH Compatible | |
Max Tire Clearance | |
Max Chainring Size | |
Water Bottle Mounts | |
Shock Length | |
Shock Stroke | |
Shock Bushing Size Front | |
Shock Bushing Size Rear | |
Shock Mounting Hardware Upper | |
Shock Mounting Hardware Lower | |
Fork Offset |
Bullit X0 AXS RSV
Sizing & Geometry
If you're on the cusp between the recommended height range of two sizes, the absolute best thing is to try to ride them both. At a minimum, check the stack/reach measurements on your current bike and compare it to the new model you are looking at to get an idea of a fit you are already comfortable with. If riding the bike is not an option, consider the following.
m | l | xl | xxl | |
---|---|---|---|---|
A. Reach | 450 | 475 | 495 | 515 |
B. Stack | 621 | 630 | 648 | 670.4 |
Head tube angle | 64° | 64° | 64° | 64° |
L. Seat Tube Length | 405 | 430 | 460 | 500 |
F. Front Center | 789.4 | 818.8 | 847.5 | 878.5 |
H. BB Height | 348 | 348 | 348 | 348 |
I. BB Drop | 25.5/6.5 | 25.5/6.5 | 25.5/6.5 | 25.5/6.5 |
E. Wheelbase | 1238.5 | 1267.9 | 1296.7 | 1327.7 |
G. Rear Center | 449 | 449 | 449 | 449 |
K. Head Tube Length | 100 | 110 | 130 | 155 |
M. Top Tube Length | 591.3 | 619.2 | 644.9 | 672.1 |
D. Seat Tube Angle | 77.2° | 77.1° | 77° | 76.8° |
J. Standover Height | 748 | 747 | 745 | 745 |
Bullit X0 AXS RSV
Setup & Support
Whether you’re the proud owner of a Bullit or are just digging deep into the details you’ll find it all here.

Rider weight lbs | Rider weight kgs | Pressure | Rebound single | Compression dual from middle |
---|---|---|---|---|
100 | 45 | 39 | 13 | middle |
120 | 54 | 47 | 12 | middle |
140 | 64 | 55 | 11 | middle |
160 | 73 | 64 | 10 | middle |
180 | 82 | 72 | 9 | middle |
200 | 91 | 80 | 8 | middle |
220 | 100 | 88 | 6 | middle |
240 | 109 | 96 | 4 | middle |
Rider weight lbs | Rider weight kgs | Pressure | Sag | Rebound single | Compression dual from middle |
---|---|---|---|---|---|
100 | 45 | 100 | 29-32%, 18-20mm | 7 | -1/-1 |
120 | 54 | 125 | 29-32%, 18-20mm | 6 | -1/-1 |
140 | 63 | 145 | 29-32%, 18-20mm | 6 | -1/-1 |
160 | 72 | 170 | 29-32%, 18-20mm | 5 | -1/-1 |
180 | 81 | 190 | 29-32%, 18-20mm | 5 | -1/-1 |
200 | 90 | 215 | 29-32%, 18-20mm | 4 | -1/-1 |
220 | 99 | 235 | 29-32%, 18-20mm | 4 | -1/-1 |
240 | 108 | 260 | 29-32%, 18-20mm | 3 | -1/-1 |
260 | 117 | 280 | 29-32%, 18-20mm | 3 | -1/-1 |
label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | 67-19217 | 1 | Head Tube Badge | Clean frame surface, center on headtube | |
B | 72-21292 | 1 | Shimano BM-E8030 | For EP801 use battery mount BM-EN801 (72-24168) | |
C | 78-21554 | 1 | Shimano BT-E8036 | For EP801 use battery BT-EN806 (78-24169) | |
D | 26-18382 | 6 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
E | 30-22329 | 1 | Bullit 3C battery cover | ||
F | 26-15939 | 2 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
G | 30-22358 | 1 | DU Protector | ||
H | 26-22358 | 1 | M3x6 | Apply Loctite 242 to threads | 0.6 Nm |
I | 26-19207 | 2 | Hose Grommet | ||
J | 34-20201 | 2 | 36.4 Seat Collar |

label | name | quantity | torque | part_number | blurb |
---|---|---|---|---|---|
A | 26-20122 | 2 | 16 Nm | M10x23 Screw | Apply Loctite 242 to threads only, apply grease to shaft only |
B | 26-21360 | 2 | Water Bottle Screw | ||
C | 08-22343 | 2 | 20 Nm | Pivot Axle M15x91 | Apply Loctite 242 to threads only, apply grease to shaft only |
D | 26-15633 | 3 | M6 Tapered Washer | Apply grease to surface | |
E | 26-11817 | 3 | M6 Washer | ||
F | 26-15947 | 3 | 9 Nm | M6x20 SHCS | Apply Loctite 242 to threads |
G | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |
H | 72-21270 | 1 | Shimano EW-CP100 | Charge port for EP8 & EP801 | |
I | 26-15939 | 2 | 0.1 Nm | M3x12 BHCS | Apply Loctite 242 to threads |
J | 26-21223 | 1 | 12.5 Nm | M8x20 BHCS | Apply Loctite 242 to threads |
K | 72-21559 | 1 | Shimano DC-EP800 | For EP801 use DC-EP801 (72-24172) | |
L | 08-20879 | 1 | 20 Nm | Pivot Axle M15x72 | Apply Loctite 242 to threads only, apply grease to shaft only |
M | 26-21231 | 1 | 22 Nm | M8x50 Shock Bolt | Apply loctite 242 to threads |

label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | 08-22209 | 1 | Rear axle 12x173.7 | Apply grease to shaft and threads | |
B | 23-23491 | 1 | SCB UDH | Interchangeable with Sram UDH | |
C | 26-23492 | 1 | SCB UDH screw | Reverse thread | 20 Nm |
D | 30-21226 | 1 | Chainstay Protector | ||
E | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
F | 30-20189 | 1 | Chainstay Protector | ||
G | 26-21223 | 3 | M8x20 BHCS | Apply Loctite 242 to threads | 12.5 Nm |
H | 26-18382 | 2 | M4x12 BHCS | Apply grease to treads | 0.65 Nm |
I | 49-21567 | 1 | Lower Link Fender | ||
J | 30-21453 | 1 | Seatstay Protector | ||
K | 26-21361 | 1 | Hose Grommet Single | ||
L | 26-15939 | 1 | M3x12 BHCS | Apply Loctite 242 to threads | 0.1 Nm |
M | 72-22286 | 1 | Shimano Speed Sensor | Use for both EP8 & EP801 |

label | name | quantity | part_number | blurb |
---|---|---|---|---|
A | 29-22342 | 1 | Upper Link | |
B | 11-12681 | 2 | 6900-2RS Bearing | |
C | 26-15533 | 2 | M10x3 Washer | Apply grease to inner surface |
D | 26-11612 | 2 | Bearing Dust Shield | Apply grease to inner surface |
E | 11-12218 | 2 | 6902-2RS Max Bearing | |
F | 26-17013 | 1 | 15x40.25 Bearing Spacer |

label | name | quantity | part_number | blurb | torque |
---|---|---|---|---|---|
A | 29-22341 | 1 | Lower Link | ||
B | 11-17708 | 4 | 6902-1ZR Bearing | ||
C | 26-11612 | 4 | Bearing Dust Shield | Apply grease to inner surface | |
D | 26-20880 | 1 | 15x32 Bearing Spacer | ||
E | 26-17707 | 1 | 15x48 Bearing spacer | ||
F | 26-12678 | 1 | M6 Grease Fitting | 9 Nm | |
G | 26-15532 | 1 | M5x5 Set Screw | Apply Loctite 242 to threads, titghten until flush | 0.5 Nm |

If you feel the pull of gravity-riding but want extra push to get to the top, the Bullit is for you. Specifically designed to be at home on the biggest-hitting terrain but with the added boost of an electric motor to drop you at the the drop-in of the wildest trails, the Bullit is the nearest thing to owning a downhill bike and a chairlift.
Dig Deep

Build kit
& Specs

Geometry
& Sizing
