Blur 1 Classic

Model Specs

Compatible Forks	80mm to 100mm total travel - 100mm travel max
Headtube/Headset	1-1/8" Straight - External. S.H.I.S EC34/28.6 EC34/30
Seat Post	30.9mm - Minimum insertion 100mm
Front Derailleur	34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width	68mm - Threaded - ISO
Chainline Spec	50mm
Recommended Max Tire Size	2.1 - may vary by tire and rim model
Brakes	Rim Brake and ISO Disc Brake Mounts
Rear Hub	135mm x 10mm (QR style)
Seatpost Clamp	34.9mm

Rear Shock Eye-to-Eye	7.875” / 200mm
Stroke	2.0" / 50mm
Mounting Bushing Width Front	22mm
Mounting Bushing Width Rear	18mm
Mounting Bolt Diameter Front	8mm
Mounting Bolt Diameter Rear	3/8” (9.53mm)
Leverage Ratio	* 2.3 : 1 - *Note: All VPP leverage ratios vary throughout the travel, so there is not a constant linear ratio. This is the average
Rear Shock Setup	Because it is highly likely the original rear shocks on older models are repaired/replaced/upgraded throughout the lifetime of the frame, we offer some very basic tuning guidelines, and recommend using the original rear shock manufacturers manual for more detailed set-up for the specific rear shock you have.Contact the rear shock manufacturer for correct manual if you do not have it.The key component for set-up with any rear shock here is sag. Once you have that set-up correctly, the rest of the shock settings are fine tuning adjustments (Rebound and Compression damping, etc.) set to rider preference.Recommended sag for this model is 10-15mm at the shock shaft. This equates to approximately 20-30% of the total rear wheel travel. Less sag = a firmer suspension feel.

Fastener	Prep	Torque	Download
Custom M8 X 1.25	Loctite 242	80 inch lbs	-
M5 X .8 X 8 allen head cap screws with washers	Grease	60 inch lbs	-
M6 X 1 X 8 allen head cap screw	Loctite 242	70 inch lbs	-
M5 X .8 X 6 allen head cap screws with washers	Loctite 242	60 inch lbs	-
M8 X 1.25 X14 allen head cap screw	Loctite 242	60 inch lbs	-