V10

Front (MM) 203

Rear (MM) 208

Wheel Size 29/MX

THERE’S NOTHING LIKE A RIDING A DH BIKE. NOTHING.

The V10 is the bike ridden by the Syndicate to World Cup victories. Fully refined—not redefined—the eighth generation V10 is designed for riders looking to emulate their heroes or find the best lines in the bike park. It’s for those who understand there’s no substitute for a proper downhill bike. Lap after lap, day after day, nothing compares to riding a downhill bike. Nothing.

See The Bikes

THE EIGHTH DEVELOPING A WINNER

PARK TO PODIUM

SPEED IS YOUR FRIEND

DH bikes are thoroughbred, singularly focused machines designed for pure speed and thrills downhill.

TUNED

THE PIECES OF THE PUZZLE

Three points of 3-position adjustment allow fine-tuning for fit, terrain and preference: the rear axle flip chip (+5mm / 0 / -5mm) adjusts fore-aft weight balance; reach-adjust headset cups (-8mm / 0 / +8mm) customize fit, and the lower link flip chip calibrates BB height and head tube angle.

Filters:

V10 DH X01

$11,199

Compare

V10 DH S

From $8,899.00

Compare

V10 Frame

Carbon CC

$4,999

Compare

Sorry, there are no products that match.

Design Details

Evolution of a Species

Designed, prototyped, tested, validated, and assembled by us right here in Santa Cruz, CA—and the UCI World Series DH circuit.

Learn More

CC Carbon

Few companies have mastered carbon like we have. Our frames, designed in California, are made in-house and include a lifetime warranty.

Learn More

Built to Last

Bikes aren't throwaway items, but they get thrown around. From the tough frames to free bearings for life, Santa Cruz bikes are built to last.

Learn More

Homologated hero

Every bike we make—from the V10 down through the model range—undergoes the same rigorous development process by the same engineers.

Learn More

VPP™

208mm of VPP™ travel, exquisitely refined with ease of tuning and serviceability in mind.

Learn More

Sweat the details

	s (27.5)	m	l	xl
A. Reach (Long/Mid/Short)	412-420-428	447-455-463	467-475-483	492-500-508
B. Stack	624	633	637	642
Head tube angle	63	63	63	63
K. Head Tube Length	100	110	115	120
G. Rear Center (Long/Mid/Short)	440-445-450	445-450-455	450-455-460	455-460-465
F. Front Center	785	825	847	874
H. BB Height	356	356	356	356
Bb drop front	17	17	17	17
Bb drop rear	-1	-1	-1	17
E. Wheelbase	1230	1275	1302	1334
L. Seat Tube Length	435	445	455	465
D. Seat Tube Angle	77.9	77.4	77.3	77
J. Standover Height	729	730	731	731

	s	m	l	xl
A. Reach (Long/Mid/Short)	411-419-427	446-454-462	466-474-482	491-499-507
B. Stack	625	634	638	643
Head tube angle	62.9	62.9	62.9	62.9
K. Head Tube Length	100	110	115	120
G. Rear Center (Long/Mid/Short)	440-445-451	446-451-456	451-456-461	456-461-466
F. Front Center	785	825	847	874
H. BB Height	353	353	353	353
Bb drop front	19	19	19	19
Bb drop rear	1	1	1	19
E. Wheelbase	1231	1275	1303	1335
L. Seat Tube Length	435	445	455	465
D. Seat Tube Angle	77.8	77.3	77.2	76.9
J. Standover Height	726	728	729	729

	s	m	l	xl
A. Reach (Long/Mid/Short)	409-417-425	444-452-460	464-472-480	489-497-505
B. Stack	626	635	639	644
Head tube angle	62.7	62.7	62.7	62.7
K. Head Tube Length	100	110	115	120
G. Rear Center (Long/Mid/Short)	440-445-452	446-451-456	451-456-461	456-461-466
F. Front Center	785	825	847	874
H. BB Height	351	351	351	351
Bb drop front	21	21	21	21
Bb drop rear	3	3	3	21
E. Wheelbase	1231	1276	1303	1335
L. Seat Tube Length	435	445	455	465
D. Seat Tube Angle	77.6	77.1	77	76.7
J. Standover Height	724	726	726	726

label	name	quantity	part_number	blurb
A	26-11612	4	Bearing Dust Shield	Apply grease to inner surface
B	11-12218	4	6902-2RS Max Bearing
C	26-17707	1	15x48 Bearing spacer
D	26-17013	1	15x40.25 Bearing Spacer

label	name	quantity	part_number	torque	blurb
A	26-27493	1	Battery mount rear PT600
B	26-28053	4	M4x10 SHCS	1.2 Nm	Apply Loctite 242 to threads
C	26-27870	1	Bosch H-Connector
D	78-25241	1	Bosch battery PT600		Bosch part number EB12.100.04X (US/CA), EB12.100.04V (EU, OZ)
E	26-27494	1	Battery mount front PT600

label	name	quantity	part_number	blurb	torque
A	08-22209	1	Rear axle 12x173.7	Apply grease to shaft and threads
B	23-23491	1	SCB UDH	Interchangeable with Sram UDH
C	26-23492	1	SCB UDH screw	Reverse thread	20 Nm
D	26-27487		M10x26 Bolt	Apply Loctite 242 to threads only, apply grease to shaft only	16 Nm
E	26-27488		Dust Shield	Apply grease to inner surface
F	11-27485		6802-2RS Bearing
G	26-27489		Bearing spacer	Apply grease to shaft
H	26-27486		M10x6 Nut	Apply grease to inner surface
I	30-27476		Chanistay protector
J	26-15939		M3x12 BHCS	Apply Loctite 242 to threads	0.1 Nm
K	26-22938		M4x10 FHCS	Apply Loctite 242 to threads	0.65 Nm
L	19-22609		OneUp chainguide
M	26-27839		OneUp chainguide back plate
N	30-27838		Cable Loop Guide
O	26-22358		M3x6	Apply Loctite 242 to threads	0.6 Nm
P	26-22570		M5x12 HHS	Apply Loctite 242 to threads	2 Nm
Q	30-21453		Seatstay Protector

label	name	quantity	torque	part_number	blurb
A	26-15532	2	0.5 Nm	M5x5 Set Screw	Apply Loctite 242 to threads, titghten until flush
B	26-20124	4		M5x16 Water Bottle screw	Apply grease to threads
C	08-22343	1	20 Nm	Pivot Axle M15x91	Apply Loctite 242 to threads only, apply grease to shaft only
D	26-15633	2		M6 Tapered Washer	Apply grease to surface
E	26-11817	2		M6 Washer
F	26-15947	2	9 Nm	M6x20 SHCS	Apply Loctite 242 to threads
G	26-27480	1		M8x7 Flip Chip	Apply grease to outside surface
H	26-20091	1	15.6 Nm	M8x45 Lowhead SHCS	Apply Loctite 242 to threads
I	26-27867	1		Bosch charge socket holder	Bosch part number EB12.120.01A
J	26-27869	2		Bosch MCx14 Screw	Bosch part number F04N.002.663
K	26-27868	1		Bosch COB O-ring	Bosch part number EB12.120.019
L	72-25237	1		Bosch charge socket	Bosch part number EB12.120.048
M	26-27866	1		Bosch charger port cover	Bosch part number EB12.120.01B
N	26-27863	2		Bosch DU mount insert sleeve	Bosch part number EB11.200.0GK
O	26-27864	1	30 Nm	Bosch DU mount bolt front	Bosch part number EB11.200.12M
P	26-27865	1	30 Nm	Bosch DU mount bolt rear	Bosch part number EB11.200.12H
Q	08-16292	1	20 Nm	Pivot axle M15x80.5	Apply Loctite 242 to threads only, apply grease to shaft only
R	26-18382	2	0.65 Nm	M4x12 BHCS	Apply grease to treads
S	30-27475	1		Fender
T	26-27481	2	16 Nm	M10x10 trunnion screw	Apply Loctite 242 to threads only, apply grease to shaft only
U	11-12681	2		6900-2RS Bearing
V	26-15533	2		M10x3 Washer	Apply grease to inner surface
W	26-27484	2	16 Nm	M10x20 bolt	Apply Loctite 242 to threads
X	11-12218	2		6902-2RS Max Bearing
Y	26-27483	2		Washer	Apply grease to inner surface
Z	26-27482	2		M10x2.6 Flip Chip	Apply grease to outside surface

label	name	quantity	part_number	blurb	torque
A	20-27756	1	Head Tube Badge	Clean frame surface, center on headtube
B	26-27915	4	M5x10 BHCS	Apply Loctite 242 to threads	9 Nm
C	30-27825	1	Shuttle guard	Line up with battery screws
D	72-25239	1	Bosch DU Performance CX	Bosch part number EB11.100.00E
E	26-23102	3	M4x16 BHCS	Apply grease to threads	0.65 Nm
F	30-27496	1	DU protector	Use 30-27495 for size S & M
G	26-21224	2	M6x10 BHCS	Apply loctite to threads	3 Nm
H	26-27862	2	Bosch DU mount nut	Bosch part number EB11.200.03C
I	26-27479	1	M8x7 Flip Chip	Apply grease to outside surface
J	34-20201	1	36.4 Seat Collar
K	26-28150	1	M4x26 Bosch Screw
L	72-25240	1	Bosch TT System Controller	Bosch part number EB13.100.000
M	26-27857	1	Bosch TT adapter	Bosch part number EB13.200.0AE

Dig Deep

Sizing and support for the V10.

Geometry
& Sizing

Setup
& Support

ROLLER DOOR

SO WHAT'S THE V10 ALL ABOUT?

Sit down with our engineers and Syndicate for a deep dive into the development story.

Listen Now

Also Consider...

STOMPING GAPS AND STAMPING PASSPORTS

See the Nomad

EXTREME CONDITIONS REQUIRE AN EXTREME RESPONSE

See the Megatower

Cart

V10

THERE’S NOTHING LIKE A RIDING A DH BIKE. NOTHING.

SPEED IS YOUR FRIEND